Synrad FH FLYER - Page 115

stand-alone
operation
SYNRAD FH Series Flyer Operator’s Manual Version 3.4
115
Conguration
File=1 /markle.mkh
# “/” symbol indicates that le resides in the Filestore’s root directory.
File=2 /markle2.mkh
File=3 /Folder1/markle3.mkh
# markle3 resides in Folder1 in the Filestore.
File=4 /Folder2/subfolder1/markle4.mkh
File=5 /network/markle5.mkh
File=6 /network/markle6.mkh
# markle and markle6.mkh reside on a network share connected via
# FH Flyer’s Ethernet port.
File=7 /markle1.mkh
# A match to “1” or “7” marks the same le (markle1.mkh) – this is OK!
# or File=0x01 /markle1.mkh; File=0x02 /markle2.mkh; etc.
File=8 /network/markle7.mkh
File=9 /markle8.mkh
# Because there are only nine valid matches, input states 0 and 10–15 will not match.
# These “no match” states are caught by the NullFile command keyword, so Flyer
# will loop without marking until a valid match occurs.
# End of le.