Synrad FH FLYER - Supported Functions

stand-alone
operation
SYNRAD FH Series Flyer Operator’s Manual Version 3.4
79
Introduction
loads a master le on boot-up. This Mast
er Control File (MCF) is read once, only on boot-up, and con-
gures Flyer to mark multiple les (previously stored in the Filestore or on a network share) in a user-con-
trolled sequence determined by input bit status. If required, you can monitor cycle time and mark progress
information from WinMark Pro through a USB or Ethernet connection. Except for starting/ending mark
sessions and exiting stand-alone operation, WinMark has no other control functionality.
Supported functions
In stand-alone mode, Flyer supports many, but not all, of the functions available under WinMark control.
Before developing mark files for stand-alone operation, refer to Table 4-1. It lists major categories of
sup-ported features for Flyer stand-alone operation. Check the WinMark Pro web site at http://
winmark.com/products/winmark_firmware.html for firmware updates that may add additional
functionality.
Table 4-1 Stand-alone marking features
Supported by Flyer Stand-alone Operation Not Supported by Flyer Stand-alone Operation
Fonts: Fonts:
WinMark Stroke (.syf) OpenType
®
(.otf)
TrueType
®
(.ttf) PostScript
®
(.pfb)
Auto Text functions: Auto Text functions:
Serial Number Text Serial Port text (use Disk File Text)
Date Code Text (incl. custom date codes) User Entry Text
Disk File Text (Sequential)
Disk File Text (Fixed)
From Another Object
All Wait Digital/Set Digital automation stages
All Event Builder stages using these commands: The following Event Builder commands:
AssignDate DoPause AskUserInput CallDLLFunc
IncSerialNumber MatchDigitalState DoBeep MarkingHeadOn
SetDigitalState WaitDigitalState ReadyStatus
ReadLineFromFile ReadFromSerialPort (use Disk File Text)
RestoreProperty SaveProperty
1D Barcodes All other WinMark Pro linear barcodes
Code 128 – 5 subsets Code 3 of 9
Extended Code 3 of 9 Interleaved Code 2 of 5
All 2D Codes including UID/Composite codes
All bitmap color reduction methods including Grayscale
Radial marking
Banner-style tracking
No Cross property
Spot Marking Style property