Synrad FH FLYER - Technical Reference

technical reference
SYNRAD FH Series Flyer Operator’s Manual Version 3.4
117
Use information in this chapter as a technical reference for your FH Flyer marking head.
This chapter contains the following information:

FH Flyer technical overview –describes SYNRAD’s FH Flyer technology.
 Input/Output circuitry – explains Flyer’s Input/Output (I/O) capability and provides
basic I/O connection diagrams.

USB port – describes Flyer’s USB interface.
 Ethernet port – describes Flyer’s Ethernet interface.
 Fast Acting Safety Interlock – describes Flyer’s Fast Acting Safety Interlock feature.
 Flyer web interface – explains details about Flyer’s Internet interface.
 Firmware upgrades – describes how to upgrade Flyer’s operating code.
 Clearing mark – describes how WinMark Pro’s clearing mark feature may prolong
optical scanner lifetime.

Over-temperature warning – describes FH Flyer’s over-temperature warning feature.
 Custom test mark feature – explains how to implement the custom test mark feature
using WinMark Pro v6 and your FH Flyer marking head.

General specications – lists FH Series Flyer marking head specications.
 FH Flyer package outline drawing – illustrates FH Series Flyer marking head package
outline and mounting dimensions.

Flyer/Model 48-1/48-2 package outline drawings – illustrates package outline and
mounting dimensions for Flyer with 48-1 (10 W) and 48-2 (25 W) lasers.

Flyer/Model 48-5 package outline drawing – illustrates package outline and mounting
dimensions for Flyer with a 48-5 (50 W) laser.

Flyer/Firestar v30 package outline drawing – illustrates package outline and mount-
ing dimensions for Flyer with a Firestar v30 (30 W) laser.

Flyer/Firestar v40 package outline drawing – illustrates package outline and mount-
ing dimensions for Flyer with a Firestar v40 (40 W) laser.

Flyer/Firestar t70i package outline drawing – illustrates package outline and mount-
ing dimensions for Flyer with a Firestar t70i (70 W) laser.
6