Synrad FH FLYER - Page 237

appendix c
SYNRAD FH Series Flyer Operator’s Manual Version 3.4
235
This appendix contains the following information:
■ Alternate mounting congurations – describes alternate methods of mounting the
FH Series Flyer marking head in relation to the laser.
■
Beam expansion/path length – briey describes beam expansion characteristics of 48
Series, Evolution, and Firestar lasers and how those properties aect the beam path
length and “remote” mounting of the FH Flyer marking head.
Important Note: Mounting the laser and FH Series Flyer marking head in non-standard congurations
(without the SYNRAD-designed L-bracket and Mounting Rail) is a complex process
and should be attempted only by personnel with experience and knowledge in optical
beam characteristics and laser/optical alignment.
C