Synrad FH FLYER - Page 90

stand-alone
operation
90
SYNRAD FH Series Flyer Operator’s Manual Version 3.4
WinMark Pro/FH Flyer interface
7 Go to WinMark Pro and right-click the Flyer Fonts folder.
8 From the contextual menu, click Paste File. The font le you selected is copied to the Flyer Fonts
folder in the Flyer Filestore.
Filestore fonts guidelines
 A maximum of 32 .ttf les can be stored in the Flyer Fonts folder.
 Load only the specic fonts required for your mark les. For example, the Arial
®
typeface
family includes Regular Arial (Arial.ttf), Arial Italic (Ariali.ttf), Arial Bold (Arialbd.ttf),
and Arial Bold Italic (Arialbi.ttf). These four les consume 1116 KB of memory. If your
mark les use the Arial Bold font, load only the Arialbd.ttf font le because it requires less
memory space (only 344 KB).
 When your mark le species “bold” or “italic”, you cannot use WinMark Pro’s Text Bold
or Text Italics properties. You must copy the font’s bold or italic typeface to the Filestore.
 The Filestore has a maximum capacity of 8 MB for all les. Some fonts like Arial Unicode
MS and Batang
®
are too large to store in the Filestore and should be stored on a network
share instead.
 There is no standard convention for naming TrueType fonts. You must carefully verify that
the fonts used in your WinMark Pro .mkh mark les are the same as the fonts loaded into
the Flyer Filestore.
Loading font les onto a network share
To load TrueType (.ttf) font les into a folder on a network share, perform the following steps:
1 On your network share drive, create a new folder and name it “Flyer Fonts” (without the quote sym-
bols). The folder name is case-sensitive and must be entered exactly as shown.
2 In Windows Explorer, navigate to the C:\WINDOWS\Fonts folder.
3 Highlight the font you wish to load into the Flyer Filestore.
4 From the Edit menu, click Copy.
5 Right-click the Flyer Fonts folder on your network share and choose Paste.
6 When you have nished adding fonts, you must refresh the Flyer font cache. To do this, right-click
in the Flyer Filestore window and select Refresh from the contextual menu.
Network share fonts guidelines
 100 .ttf les, maximum, can be stored in the Flyer Fonts folder residing on a network share.
 After a font le is added or removed from the Flyer Fonts folder on the network share, you
must refresh the Flyer font cache. To do this, right-click in the Flyer Filestore window and
select Refresh from the contextual menu.