T-Drill S-80 - Transport, Handling and Location; Transport and Location; Lifting Instructions

COLLARING MACHINE
11
S-80
4. TRANSPORT, HANDLING AND LOCATION
4.1. TRANSPORT AND LOCATION
For transport the S-80 is bolted to a wooden pallet and covered with plasc. A waterproof
protecon is provided for the electric cabinet.
The machine can be stored in a dry place.
¨NOT!¨ 
unit to overturn.
4.2. LIFTING INSTRUCTIONS
The machine can be lied / moved using fork li truck, or with a crane and liing chains.
1
2
Liing the S-80 machine: 1. Use a fork truck: drive the forks through the machine frame
holes, ensure that the forks go all the way through the machine frame to the other side!
2. Use a li bar and chains or a strap, li the machine from the liing lugs aached to the
frame.
L When lifting the machine with a fork truck: drive the forks through
the machine frame holes, ensure that the forks go all the way through
the machine frame to the other side, otherwise the machine may tip
over!
The covers and electric cabin are lied from the pallet using a crane and liing straps and
chains.