T-Drill S-80 - Tool Settings

INSTRUCTION MANUAL
34
6.2.2.3.3. TOOL SETTINGS
Sengs for all tools.
1
2
3
1. Tap to open Milling tool sengs screen
2. Tap to open Collaring and trimming S-80 combinaon tool sengs screen
3. Tap to open Drilling, collaring and trimming combinaon tool sengs screen
1
2
3 4
1.
Tool idencaon
list
Select the tool to manage from the list (acvate line and it
will turn red).
2. Select- buon
Tap to select the acvated tool, opens a new adjustment
screen (see next picture).
3. Copy
A faster way of making a new line to the list:
Copy an acvated line, and paste it below an acvated line.
4. Paste