T-Drill S-80 - Ordering Spare Parts

INSTRUCTION MANUAL
84
12. ORDERING SPARE PARTS

- Type code of the machine
- Manufacturing code of the machine
- The part number
- A descripon of the part
- The quanty of the parts required
The type code and manufacturing code of the machine are indicated on the nameplate of
the machine. The other informaon can be found from parts list.

10.1. CLAMP SUPPORT <168 5500896
ItemPart No. Name Size/Type Std./Manuf.Qty
13500903 Clamp frame 2
23500904Fastening plate 2
39214010 Screw M8 x 25 8.8
DIN7984
8
49016007 Set screw M8 x 812.9
DIN913
4
54280104 Clamp holder pin 4
69018037Parallel pin Ø6m6 x 32 DIN6325 4
79018219 Spring pin Ø6 x 30 DIN14812
1 2 3
1. Part number 2. Descripon 3. Quanty



Contact informaon: Global USA, Mexico, Canada
Spare part inquiries and orders sales@t-drill. sales@t-drill.com
Technical support service@t-drill. service@t-drill.com
Fax: +358-6-4753 383 (+1) 770-925-3912
Telephone: +358-6-4753 344 (+1)770-925-0520 ext. 245