T-Drill S-80 - Servo Motors

COLLARING MACHINE
43
S-80
6.2.2.3.6. SERVO MOTORS
1
2
3 4 5
Adjustment parameters for the servo motors: The selected servo motor frame will turn
green on the screen (the motor can also be selected from the screen by tapping the
colored frame around it).
1. Manageable parameter values
Values to adjust, tap numeric eld to open
keypad.
2. Servo motor axis list
Choose axis to move / check posion from the
pull down menu.
3. Save 
4. Export
The buon exports the informaon data to
the predened folder on the computer C-drive
(C:\T-Drill\).
5. Import
The buon imports the informaon data from
the predened folder on the computer C-drive
(C:\T-Drill\).