T-Drill S-80 - Symbols and Warnings Used in the TCC-28 Machine

INSTRUCTION MANUAL
6
1.3. 
Read the instrucon manual aenvely before carrying out
installaon, operaon, seng or maintenance of the machine.
Electric box. Danger may be caused by electric installaon.
Sharp edges!
Be extremely cauous when handling this area of the machine.
Don’t look into the pipe during the process relang to the collar.
Don’t put your hands on the tube line under the machine or in
the end of the machine during process.
Mind the rotang tool.
Warning! Moving parts. Be extremely cauous when handling
this area of the machine.
Use hearing protector when operang with the machine.
Use safety shoes when handling pipes and the tools of the
machine.
Use protecve glasses when operang with the machine.
Always use protecve gloves when handling the tools - the
cung edges and the lubricant used may cause wounds and
inammaons.