T-Drill S-80 - Page 79

COLLARING MACHINE
79
S-80
4. The tool locking device
thread: Check the lubricaon
of the thread once a month.
Lubricate the thread if
required.
Use Wurth HSS 2000 grease
spray or equivalent.
!
All other bearings of the S-80 unit are sealed and lubricated for lifeme.

1. Turn the main switch o (0).
2. Lubricate the above-menoned parts (especially part 3) with vaseline: KLÜBER ISOFLEX
TOPAS L152 (NLGI 2) or equivalent.

