Technomark Multi4 V3 User Manual

TRAÇABILITÉ CRÉATIVE
CREATIVE TRACEABILITY
TECHNOMARK
1 Allée du développement 83
42350 La Talaudière (France)
Tel : +33 (0) 4 77 22 25 91
Fax : + 33 (0) 4 77 22 38 93
E-mail : info@technomark-marking.com
V : SJ Le : 20/06/17 R : DD
www.technomark-marking.com
Sales Service
The ambient temperature is
outside specifications (110°C
for motor drivers, 90°C for
power supply drivers)
Stop the controller for about 10
minutes then start again
If still a problem, call After
Sales Service
Marking in a row many files
with big number of characters
and using a high quality matrix
Decrease the number of dots
by using a different font.
Reduce the marking speed
Reduce the marking strength
If still a problem, call After
Sales Service
Error 56 : Unknown error
Restart the controller
Contact After Sales Service.
Error 57 : Datamatrix license
error
The datamatrix license missing
Delete datamatrix in the
marking file
Fill the datamatrix license
number in the license menu
Error 58 : Logo license error
The logo license missing
Delete logos in the marking file
Fill the logo license number in
the license menu
Error 68 : Variable empty error
A forced variable isn’t filled
Fill forced variables before
starting the marking
Error 69 : Low battery error
The battery is almost empty
Charge the battery
The controller screen does not
work
The controller is not powered
up
Check that the power cable is
properly connected
Check the on/off switch
position
Eventually call After Sales
Service

Technomark Multi4 V3 Specifications

General

Brand	Technomark
Model	Multi4 V3
Category	Measuring Instruments
Language	English