Tektronix MDO34 User Manual

List of Figures
Figure 1: Power cord connector and power standby switch........................................................................................................35
Figure 2: Connecting probes to the instrument........................................................................................................................... 36
Figure 3: 3 Series MDO controls.................................................................................................................................................38
Figure 4: Probe Comp connections.............................................................................................................................................61
Figure 5: Spectrum trace MANm handle info............................................................................................................................ 240
Figure 6: Spectrum trace markers.............................................................................................................................................241
Figure 7: Lower (narrower) RBWs take longer to process, but have finer frequency resolution and a lower noise floor. ........244
Figure 8: Higher (wider) RBWs take less time to process, but have less frequency resolution and a higher noise floor. ........244
Figure 9: The channel 1 sine wave shows the output of the AFG. The channel 2 square wave show the output of the
AFG sync pulse. It comes from the AUX OUT port.....................................................................................................248
List of Figures
3 Series Mixed Domain Oscilloscope Printable Help 10

Tektronix MDO34 Specifications

General

Analog Channels	4
Sample Rate	2.5 GS/s
Record Length	10 Mpoints
Mixed Domain Analysis	Yes
Waveform Capture Rate	>280, 000 wfms/s
Spectrum Analyzer Frequency Range	9 kHz to 3 GHz
Vertical Resolution	8 bits
Input Coupling	AC, DC, GND
Operating Temperature	0°C to +50°C
Digital Channels	16
Connectivity	USB, LAN, HDMI
Arbitrary Function Generator	50 MHz
Trigger Types	Edge, Pulse Width, Runt, Logic, Setup/Hold, Rise/Fall Time, Video
Input Impedance	1 MΩ
Maximum Input Voltage	300 Vrms
Dimensions	140 mm
Weight	4.5 kg
Bandwidth	100 MHz, 200 MHz, 350 MHz, 500 MHz
Display	10.1-inch capacitive touch HD display
Voltmeter	4-digit