Welcome to the 3 Series MDO instrument help
This help supports 3 Series MDO (MDO34, MDO32) instruments. See the following list for information on the key features.
MDO34, MDO32 Key features and benefits
3 Series Mixed Domain Oscilloscopes are 6-in-1 integrated oscilloscopes, offering a built-in spectrum analyzer, arbitrary function generator,
logic analyzer, protocol analyzer, digital voltmeter and frequency counter.
Key features include:
• A dedicated RF input channel for frequency domain measurements
• 1 GHz spectrum analyzer standard, 3 GHz optional
• Bandwidths from 100 MHz to 1 GHz
• 2- and 4-channels for time domain measurements
• Sixteen-channel digital input option
• Large 11.6” HD (1920 x 1080 pixel) capacitive touchscreen display
• User interface optimized for touchscreen use
• Sample rates of 2.5 GS/s on all analog channels (5 GS/s on 1 or 2 channels for the MDO34 or MDO32 with the 1 GHz option)
• 10 M points record length on all channels
• Maximum waveform capture rate: 280,000 waveforms/second, with FastAcq: >50,000 waveforms/second with normal operation
• Advanced triggering and analysis: I2C, SPI, USB 2.0, CAN, CAN FD, LIN, FlexRay, RS-232, RS-422, RS-485, UART, I2S, Left Justified
(LJ), Right Justified (RJ), TDM, MIL-STD-1553, ARINC429 (with the appropriate option), and Parallel
• Power analysis (optional)
• Arbitrary function generator and 16 digital channels (optional)
• Digital voltmeter and trigger frequency counter free with product registration
3 Series MDO Help, version 20210729-16:00 for Firmware v1.10.0 and later
Welcome to the 3 Series MDO instrument help
3 Series Mixed Domain Oscilloscope Printable Help 19
To Next Page
Loading...
Need help?
General
