Tektronix MDO34 User Manual

functional test 58
G
getting help 20
GPIB address
184
GPIB talk/listen address 80
graticule intensity 77, 91
graticule intensity, setting 230
graticule style 77, 91
graticule style, setting 230
H
H Bar cursors 172
Hamming window
defined 269
handle rotate 32
handles, analog and digital 45
Hanning window
defined 268
Hard transit case 22
harmonics 267
Harmonics 106
HDMI output (rear panel) 43
help 191
help menu 175
Help system 57
hex virtual keypad 228
HF reject 252
Hi Res
acquisition mode 100
High 102
High Res acquisition mode
236
High Res button 38
holdoff 226, 251
holdoff, trigger 88
Horizontal acquisition
delay 238
position
238, 255
reference point 255
window 237
Horizontal controls 38
horizontal menu, open 67
horizontal mode 192
horizontal scale 192
horizontal settings 192
host name 184
how to
add a measurement 72
Add bus waveform 71
Add math waveform
71
Add reference waveform 71
add waveform to screen 69
change graticule intensity 77
how to (continued)
change graticule style 77
change measurement settings 74
change persistence 77
change waveform intensity 77
change waveform settings 77
check power-on self tests results 35
compensate TPP250, TPP0500B, TPP1000 probes 60
connect probes 36
connect to network 62
connect to PC using USB cable 80
Define Mask 115
delete a measurement 75
display cursors 78
download, install firmware 59
load a reference waveform 99
open acquisition menu 68
open horizontal menu 67
quickly display waveform (Autoset) 66
recall a reference waveform 99
recall an instrument setup 99
remote access the oscilloscope (from Web) 80
run signal path compensation (SPC) 59
save a screen image 97
save a waveform file 97
save all 98
save instrument settings 98
set acquisition parameters 68
set channel vertical parameters 70
set date 173
set GPIB talk/listen address 80
set horizontal parameters 67
set probe deskew 70
set probe parameters 70
set pulse width trigger 87
set time 58, 173
set trigger holdoff 88
set trigger parameters 67
set UTC time 173
update firmware 59
use Autoset 66
use mouse with the UI 55
I
I/O 184
I2C
bus trigger settings 206
serial bus menu
123
I2C bus trigger settings 199
I2S 118
inactive channel buttons 45
ink saver mode 177
Input
resistance 237
|

Tektronix MDO34 Specifications

General

Analog Channels	4
Sample Rate	2.5 GS/s
Record Length	10 Mpoints
Mixed Domain Analysis	Yes
Waveform Capture Rate	>280, 000 wfms/s
Spectrum Analyzer Frequency Range	9 kHz to 3 GHz
Vertical Resolution	8 bits
Input Coupling	AC, DC, GND
Operating Temperature	0°C to +50°C
Digital Channels	16
Connectivity	USB, LAN, HDMI
Arbitrary Function Generator	50 MHz
Trigger Types	Edge, Pulse Width, Runt, Logic, Setup/Hold, Rise/Fall Time, Video
Input Impedance	1 MΩ
Maximum Input Voltage	300 Vrms
Dimensions	140 mm
Weight	4.5 kg
Bandwidth	100 MHz, 200 MHz, 350 MHz, 500 MHz
Display	10.1-inch capacitive touch HD display
Voltmeter	4-digit