Telos TWOx12 - Volume Menus

TELOS TWOX12 USER’S MANUAL
DESKTOP DIRECTOR GUIDE FOR TALENT
CHAPTER 6
PLEASE COPY THIS SECTION AND GIVE TO YOUR ON-AIR STAFF
93
Talent
The default Desktop Director LCD Screen
The LCD screen and menu navigation buttons are used to set volume settings and to
select the “mode” for a particular Desktop Director™. In particular, you will need to
be sure the director is in Talent mode so the buttons work as described in this section.
To change from Producer mode to Talent mode:
• Press the soft key button below the word mode. You should now see a screen
that looks similar to the following.
Configuration Menu
%
Director Mode
Contrast
Backlight
• Now press the 6once. The words Director Mode should be highlighted by a
grey cursor bar and the black text will change to white.
• Now press the select button
• You will now see a screen that looks like:
ENTER <= or => TO CHANGE
Producer
• Press 6 or 5 to change the setting.
• Press Select to confirm your choice or just press the soft key below the word
Back to get to return the main menu without the change taking effect.
6.3.2 Volume Menus
Pressing the soft key button below the word VOLUME will display one of the
following screens. Pressing that soft key repeatedly will cycle through each of these
screens.
MODE HELP VOLUME
BACK HELP
BACK HELP