Telos TWOx12 - Telephone Mode Buttons; User Function Buttons and Leds; Desktop Director LCD Screen & Menu Navigation Buttons

TELOS TWOX12 USER’S MANUAL
DESKTOP DIRECTOR GUIDE FOR CALL SCREENERS
CHAPTER 5
PLEASE COPY THIS SECTION AND GIVE TO YOUR CALL SCREENERS
84
5.3.2 Telephone Mode Buttons
Dial pad buttons
These are used for dialing out, as with any telephone. They remain active during a
call for use accessing voice mail and other services.
Speaker phone button
(Speaker phone) – This button places a call that is on the handset onto this
Desktop Director’s built-in speaker phone. If the handset is on hook this button
places the next line selected on the left column on the speaker phone.
Mute button
(Mute) – This button mutes the handset microphone and hands free
microphone on the Desktop Director™. The LED beside this button will light to
indicate that these microphones are muted. Pressing this button again will cancel
the muting function.
- This button is not implemented and therefore can be disregarded.
5.3.3 User Function Buttons –
These buttons can be used for control of equipment external to the Telos phone
system. For instance the ?#@! button may used to control your obscenity delay
dump, etc.
(user button) – Check with your chief engineer to determine what this button
does. It can be used to control equipment external to the TWOx12 such as the “delay
dump” input on an obscenity delay unit.
(record control) – Again, check with your chief engineer to determine if this
button is setup to control something. This button is used generally used in
conjunction with an external recorder. Pressing this button once would normally
cause the recorder to Start. The LED next to this button should now illuminate.
Pressing the record control button again will normally cause the recorder to Stop. The
LED next to this button should now go out.
5.4 Desktop Director™ LCD Screen & Menu Navigation Buttons
The LCD status is used for general status information and for configuring the
Desktop Director™. Items can be selected and changed using the 6 buttons
immediately below the LCD screen. The buttons in the row immediately below the
LCD screen are “soft buttons”. The function of these buttons will be indicated on the
bottom row of the screen.