Telos TWOx12 - Dropping Calls off Air; Using as a Telephone

TELOS TWOX12 USER’S MANUAL
DESKTOP DIRECTOR GUIDE FOR TALENT
CHAPTER 6
PLEASE COPY THIS SECTION AND GIVE TO YOUR ON-AIR STAFF
98
6.4.5 DROPPING CALLS OFF AIR
• Look at the Status Symbol™ icon for the line(s) in question and verify that
that the LOCK symbol is not showing. If LOCK is showing press the Line
button for this line to unlock it.
• If you wish to select another caller you can just press another Line button in
this column, or you can press the Drop
button.
• To place the call on hold press the Hold
button instead.
6.5 USING AS A TELEPHONE
Making calls using the handset
-Just pick up the handset, select a line using the left column and dial. To dial use the
dial pad buttons as you would any phone. If you wish to place this caller on air you
can press the Left or Right Line button to place the caller on Caller 1 or Caller 2,
respectively. If you hang-up the handset, the caller will be lost unless you have
placed them on hold or on-air.
Using the studio microphone and cue speaker
-This is identical to placing callers on-air, just be sure that your microphone and
caller 1 & caller 2 faders are in cue, not program! Put the caller you want to talk to in
cue. Your board may have an automatic provision for this as well. In the unlikely
event you experience feedback lower the cue speaker volume slightly.
Making calls using the built-in speaker phone
-Just push the Handsfree button, select a line using the left column and dial. To dial
use the dial pad buttons as you would any phone. If you wish to place this caller on
air you can press the Left or Right Line button to place the caller on Caller 1 or Caller
2, respectively.
Answering calls with the handset
-Pick up the handset and select a line using the left column or press Next to select
the line which has been ringing longest.
Answering calls with the Speakerphone
-Press the Handsfree button and select a line using the left column or press Next to
select the line which has been ringing longest.