TELOS TWOX12 USER’S MANUAL
DETAILED CONFIGURATION & REFERENCE
CHAPTER 7 116
Studio Adapt
This selection enables (on) or disables (off) the acoustic adaption process used for
feedback control when the system is used with open speakers. The usual setting is on,
and should be used whenever open speakers are employed with microphones. This
should only be defeated when the Telos TWOx12 is being used as a “telephone
coupler” to send one-way audio down the phone line. Default is On.
h
HOT TIP!
When using open speakers it is best not to change the speaker or mic positioning while
the system is operating as this will require the system to readapt and temporary
feedback may occur while this is happening.
Adapt Burst
Turns the adaption tone sent to the caller off or on. Turning this selection off will
prevent the tone from being sent. Under those circumstances the hybrid sections will
adapt only when send - to caller audio is present. If this option is off the announcer
audio during the first few syllables of send - to caller audio may sound “hollow” or
“tinny” as adaption takes place.
7.3.2 The Tel Menu
This menu consists of selections that adjust things associated with the telephone
circuit such as ISDN setup parameters. Note that the items for Slot A, Slot B, Slot C,
Slot D, and slot E will say “POTS”, “ISDN”, or “EMPTY” depending on how your
system is configured.
Audio Settings
Telco Natl.I-1
Slot A ISDN $
Slot B ISDN $
Slot C ISDN
$
Telco Settin
s