Telephone Line Emulator User’s Manual
40-400-00020, Rev. M
113
Error Message: File “filename not found!” (Audio File)
Explanation: A previously selected voice file cannot be found in the audio
subdirectory of the TLE_PC program.
Error Message: Wrong File Type! File must be Mono 8.000 kHz 8-bit mu-law wave file.
Explanation: A WAV file has been selected which is not compatible with the TLE.
Upgrade Error Messages
Error Message: An upgrade to “upgrade type’ is available for this unit. Do you wish to
download now?
Explanation: When a user has installed an upgrade package and upgrade key (i.e.:
Advanced Simulation, International, etc.) the program compares the key
to the TLE when a TLE is connected. When the key and TLE are
validated, the program displays this message, allowing the user to either
upgrade the TLE at that time, or postpone the upgrade. If the user
chooses to upgrade the TLE at that time, the program will download
new microcontroller and DSP code to the TLE if necessary, and
upgrade the TLE with new software.
Note: If the TLE has had a previous upgrade installed, the new
upgrade will be added to the TLE (i.e.: if previously upgraded to
Advanced Simulation, and now upgrading to International, the TLE will
be upgraded with both Advanced Simulation and International features).
Error Message: Programming this unit requires an update to the TLE_PC Software.
Explanation: The TLE has been upgraded (i.e.: to Advanced Simulation and/or
International), and is connected to a PC which has a version of the
TLE_PC software which does not support the upgrade. The user should
install the upgrade software on all PC’s to which the upgraded TLE is
connected.
Note: Newer versions of TLE_PC software are compatible with all
previous TLE configurations. It is recommended that users always
install the latest version of TLE_PC software on all systems which they
use to configure TLEs.
Error Message: Newer code is available for this unit. Do you wish to download now?
Explanation: Newer Microcontroller and/or DSP code has been installed on the PC
and is available to be downloaded to the TLE. The normal response is
YES.
Communication Port Errors
Error Message: The selected port is unavailable or in use by another application. Please
select another port, or close the other application.
Explanation: The serial communications port which is selected in the program is not
available to be used by the TLE_PC program. Verify which port the TLE
is connected to, and select that port for configuring the TLE, and close
all other applications which are currently using that port.
To Next Page
Loading...