Texas Instruments MSP430 series User Manual

Information About Cautions and Warnings
This document may contain cautions and warnings.
CAUTION
This is an example of a caution statement.
A caution statement describes a situation that could potentially damage your software or equipment.
WARNING
This is an example of a warning statement.
A warning statement describes a situation that could potentially cause harm to you.
The information in a caution or a warning is provided for your protection. Read each caution and warning
carefully.
Related Documentation From Texas Instruments
MSP430 development tools documentation:
MSP Debuggers User's Guide
Code Composer Studio IDE for MSP430 MCUs User's Guide
Code Composer Studio IDE
IAR Embedded Workbench for MSP430 User's Guide
IAR Embedded Workbench IDE
eZ430-F2013 Development Tool User's Guide
eZ430-RF2480 Demonstration Kit User's Guide
eZ430-RF2500 Development Tool User's Guide
eZ430-RF2500-SEH Development Tool User's Guide
eZ430-Chronos Development Tool User's Guide
Spectrum Analyzer (MSP-SA430-SUB1GHZ) User's Guide
MSP-EXP430F5529 Experimenter Board User's Guide
MSP-EXP430F5438 Experimenter Board User's Guide
MSP-EXP430G2 LaunchPad Development Kit User's Guide
MSP Gang Programmer (MSP-GANG) User's Guide
MSP430 Gang Programmer (MSP-GANG430) User's Guide
MSP430 device user's guides:
MSP430F1xx Family User's Guide
MSP430x2xx Family User's Guide
MSP430x3xx Family User's Guide
MSP430F4xx Family User's Guide
MSP430F5xx and MSP430F6xx Family User's Guide
CC430 Family User's Guide
MSP430FR57xx Family User's Guide
Read This First
www.ti.com
8 MSP430™ Hardware Tools SLAU278AG – MAY 2009 – REVISED DECEMBER 2020
Submit Document Feedback
Copyright © 2020 Texas Instruments Incorporated

Texas Instruments MSP430 series Specifications

General

Program Memory Type	Flash
CPU Core	MSP430
Clock Speed	Up to 25 MHz
Flash Memory	Up to 512 KB (depending on specific device)
RAM	Up to 66 KB (depending on specific device)
Operating Voltage	1.8V to 3.6V
ADC	10-bit or 12-bit
Communication Interfaces	UART, SPI, I2C, USB
Temperature Range	-40°C to +85°C
Timers	16-bit timers
Architecture	16-bit RISC
Low Power Modes	Multiple (LPM0 to LPM4)

Summary

Read This First

Information About Cautions and Warnings

Details on understanding and interpreting caution and warning statements for user protection.

Chapter 1: Get Started Now!

1.1 Kit Contents, MSP-TS430xx

Lists the components included in the MSP-TS430xx kit for specific target socket modules.

1.4 Kit Contents, MSP-FET430UIF

Lists the components included in the MSP-FET430UIF kit, featuring a USB interface.

1.6 Kit Contents, eZ430-F2013

Lists the components included in the eZ430-F2013 kit, a USB stick form factor interface.

1.14 Hardware Installation, MSP-FET and MSP-FET430UIF

Instructions for installing the hardware for MSP-FET and MSP-FET430UIF debuggers.

Chapter 2: Design Considerations for In-Circuit Programming

2.1 Signal Connections for In-System Programming and Debugging

Details signal requirements and connections for in-system programming and debugging using JTAG.

Appendix C: Hardware Installation Guide