Texas Instruments MSP430 series

B.11 MSP-TS430PW28A
JTAG Mode selection:
4-wire JTAG: Set jumpers J4 to J9 to position 2-3
2-wire "SpyBiWire": Set jumpers J4 to J9 to position 2-1
Figure B-22. MSP-TS430PW28A Target Socket Module, Schematic
www.ti.com
Hardware
SLAU278AG – MAY 2009 – REVISED DECEMBER 2020
Submit Document Feedback
MSP430™ Hardware Tools 63
Copyright © 2020 Texas Instruments Incorporated