GENERAL INFORMATION AND ROUTINE MAINTENANCE
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
7
• Multi-purpose Battery Protectant (P/N27619G01)
formulated to form a long-term, flexible, non-
tacky, dry coating that will not crack, peel or flake
over a wide temperature range.
• Use windshield and plastic protectant (P/N
606314) to remove minor scratches from wind-
shield.
HARDWARE
Periodically, inspect the vehicle for loose fasteners. Use
care when tightening fasteners, refer to the following
table for torque values (Figure. 7).
Standard:
• Grade 2 hardware is unmarked.
• Grade 5 hardware can be identified by the three
marks on the hex head.
• Grade 8 hardware is identified by six marks on the
head.
The class specification is marked on metric hardware.
TORQUE SPECIFICATIONS
Figure. 7 Torque Specifications
%0083659)*-+96)7%6)-2*80&72Q
&3087->)
+VEHI
9RPIWWSXLIV[MWIRSXIHMRXI\XXMKLXIREPPLEVH[EVIMREGGSVHERGI[MXLXLMWGLEVX
8LMWGLEVXWTIGMJMIWPYFVMGEXIHXSVUYIJMKYVIW*EWXIRIVWXLEXEVITPEXIHSVPYFVMGEXIH[LIR
MRWXEPPIHEVIGSRWMHIVIH[IXERHVIUYMVIETTVS\MQEXIP]SJXLIXSVUYIVIUYMVIHJSVHV]JEWXIRIVW
+VEHI
+VEHI
&3087->)
'PEWW
+VEHI
1 1 1 1 1 1 1
'PEWW
+VEHI
'PEWW
+VEHI
To Next Page
Loading...
