DIRECTION SELECTOR
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
79
DIRECTION SELECTOR
Figure. 1 Direction Selector
DIRECTION SELECTOR
Before you remove a suspected faulty micro switch, make
sure the electrical wires are firmly attached and the wires
are in good condition.
Removing Direction Selector
Tool List Qty.
Torque Wrench, in. lbs................................................. 1
Ratchet........................................................................ 1
Socket, 7/16” ............................................................... 1
Socket, 5/16”................................................................1
Wrench, 7/16” ..............................................................1
Wrench, 5/16” ..............................................................1
Phillips Screwdriver .....................................................1
Digital Volt Ohm Meter (DVOM)...................................1
Always observe the following warnings when working on
or near a battery.
*VSRXSJ:ILMGPI
To Next Page
Loading...
Need help?
General
