3
Learning Center
Set Up the Instrument
Thermo Scientific NanoDrop One User Guide 179
Set Up Bluetooth Connections
Use Bluetooth™ to connect the instrument to one or more Bluetooth (wireless) input devices
such as a Bluetooth keyboard, mouse or barcode scanner.
Set up Bluetooth connections on the instrument
– from instrument Home screen, tap (Settings)
–tap System tab
–tap Bluetooth (if Bluetooth is disabled, button in upper right is set to “Off” and no
Bluetooth input devices are listed)
–tap Off button to enable Bluetooth connectivity (button turns blue, changes to “On”
and software automatically searches for any available Bluetooth input devices)
If no Bluetooth devices are found, after a few seconds the message “No nearby
Bluetooth devices were found” is displayed
–to add a Bluetooth device, follow manufacturer instructions to pair the device (for
example, you may need to hold down a button) and tap Search For Devices on
instrument)
Note Make sure the device is labeled “Bluetooth” and not just “wireless.” All Bluetooth
devices are wireless but not all wireless devices will run with Bluetooth.
To Next Page
Loading...
