3
Learning Center
NanoDrop One Viewer Software
258 NanoDrop One User Guide Thermo Scientific
Find Absorbance Values on a Spectrum
You can easily view the absorbance value that corresponds with any wavelength in a displayed
spectrum.
Find absorbance values on a spectrum
– open the experiment
– select the measurement
– click and hold the point on the displayed spectrum
The wavelength and corresponding absorbance value are displayed in a popup box:
Overlay Spectra
If you want to display the spectra for all measurements in the experiment layered on top of
each other in the spectral pane, open the experiment, right-click the spectral pane and select
Overlay Mode. The spectra are displayed in a variety of colors.
NOTICE Deleted data cannot be recovered.
Note You can also drag the mouse along the spectrum’s X-axis to display
absorbance values sequentially.
Note To display multiple selected spectra layered on top of each other without using
Overlay Mode, simply select the measurements in the open experiment.
To Next Page
Loading...
