THOMSON TSC 900 User Manual

TSC 900 TRANSFER SWITCH CONTROLLER
PM 151 REV 5 16/04/19 Thomson Power Systems
3.5. GHC DISPLAY MAIN MENU PAGE DESCRIPTIONS 25
3.5.1. HOME PAGE 26
3.5.2. UTILITY METERING PAGE 27
3.5.3. GENERATOR METERING PAGE 27
3.5.4. LOAD METERING PAGE 28
3.5.5. ALARMS PAGE 28
3.5.6. ALARMS LOG PAGE 29
3.5.7. EVENTS LOG PAGE 31
3.5.8. SYNC PAGE 32
3.5.9. SCHEDULER PAGE 33
3.5.10. SETTINGS PAGE 33
3.5.11. SYSTEM PAGE 34
3.6. GHC DISPLAY SYSTEM SUBMENU PAGE DESCRIPTIONS 35
3.6.1. IMPORT/EXPORT DATA 35
3.6.2. DATE / TIME SETUP 35
3.6.3. MANAGE USERS 36
3.6.4. SYSTEM INFORMATION 36
3.6.5. INPUT MAPPING 37
3.6.6. OUTPUT MAPPING 37
3.6.7. LOGS 38
3.6.8. COMMUNICATION STATUS 38
3.6.9. MIMIC BUS CUSTOMIZATION 39
3.6.10. FIRMWARE UPDATES 39
3.6.11. GHC HEALTH 39
4. OPERATING INSTRUCTIONS 40
4.1. GHC SCREEN PAGE NAVIGATION 40
4.2. HELP INFORMATION 40
4.3. ON LOAD TEST INSTRUCTIONS (UTILITY POWER FAIL SIMULATION) 41
4.4. OFF LOAD TEST INSTRUCTIONS (GENERATOR NO LOAD TEST) 42
4.5. TIMED TEST INSTRUCTION 43
4.6. OPEN/CLOSED TRANSITION TRANSFER OPERATION 45
4.6.1. OPEN TRANSITION IN-SYNC TRANSFER OPERATION (MODEL X) 46
4.6.2. CLOSED TRANSITION OPERATION (FAST TRANSFER MODEL 3) 46
4.6.3. CLOSED TRANSITION OPERATION (SOFT-LOAD TRANSFER MODEL 4) 47
4.7. DUAL SOURCE ATS OPERATION 50
4.7.1. DUAL SOURCE - CHANGING PREFERRED UNITS (GHC CONTROL) 51
4.8. TRANSFER FAIL ALARM RESET 52

THOMSON TSC 900 Specifications

General

Brand	THOMSON
Model	TSC 900
Category	Controller
Language	English