THOMSON TSC 900 - Administrator Password Management Procedure

TSC 900 TRANSFER SWITCH CONTROLLER
PM 151 REV 5 16/04/19 Thomson Power Systems
59
5.3. ADMINISTRATOR PASSWORD MANAGEMENT PROCEDURE
With the transfer switch energized, follow the procedure below to add or edit a list of ATS
users.
• Navigate to the “System” Page and select “Manage Users” as shown below
• When the “Manager Users” button is pressed, the following pop-up screen will appear.
This page will indicate which existing users have been entered already and new users to
be added or existing users to be edited. Select desired action button (i.e. Add User or Edit
User)
• To Add a user, press “Add User” button and the following pop-up screen will appear. Complete
the information as listed, then press Apply to accept the change.