THOMSON TSC 900 - System Time;Date Adjustment

TSC 900 TRANSFER SWITCH CONTROLLER
PM 151 REV 5 16/04/19 Thomson Power Systems
60
5.4. SYSTEM TIME/DATE ADJUSTMENT
To adjust the TSC 900 controller’s internal time clock, follow the detailed procedure below.
• Navigate to SYSTEM screen and press TIME/DATE SETUP button as shown below.
• Select Date field and a calendar will automatically pop-up to allow selection of day, month
and year as shown below.
• Select Time fields and drop down lists will appear to allow selection of desired hour, minute
and AM/PM settings.
• Select Time zone field and a drop down list will appear to allow selection of desired time
zone. Note: To show only North American Time Zones, select check box as shown below
• Once correct time/date & time zone is entered, then use the Apply button to accept the
change.