THOMSON TSC 900 User Manual

TSC 900 TRANSFER SWITCH CONTROLLER
PM 151 REV 5 16/04/19 Thomson Power Systems
35
3.6. GHC DISPLAY SYSTEM SUBMENU PAGE DESCRIPTIONS
The system page is utilized for viewing and/or programming site specific settings based on the
application. Different sub-menu pages are available as shown below. Each System sub-menu
pages can be viewed by selecting the specific button. Refer to Section 5 for programming
description of each submenu. Note: To exit any submenu, press the red x icon.
3.6.1. IMPORT/EXPORT DATA
The import/back-up data page is utilized for importing either new program settings or
updated firmware. Current controller settings can also be backed-up or restored from the
GHC SD memory card. Refer to the Programming section of this manual for further
details on import/back-up operating procedures.
3.6.2. DATE / TIME SETUP
The date/time setup page is utilized for changing the TSC 900 real time clock settings to
match the installed location.
Refer to the Section 5.4 for further details on time/date change procedures.

THOMSON TSC 900 Specifications

General

Brand	THOMSON
Model	TSC 900
Category	Controller
Language	English