THOMSON TSC 900 - Scheduler Page; Settings Page

TSC 900 TRANSFER SWITCH CONTROLLER
PM 151 REV 5 16/04/19 Thomson Power Systems
33
3.5.9. SCHEDULER PAGE
The scheduler page is utilized to set on load or off-load Exercise events using a calendar
based scheduler. Multiple exercise events, dates and times can be selected. By
pressing the “New” or “Edit” buttons a pop-up menu will appear as shown below. Refer
to Operating Instruction section of this manual for further details on how to configure the
Exercise Scheduler.
3.5.10. SETTINGS PAGE
The settings page is utilized for programming or configuring any timer, voltage set point,
frequency set point, I/O mapping or optional features in the controller. The settings can
be viewed via different filter settings based on function. Refer to the Programming section
of this manual for further details on function programming.