THOMSON TSC 900 - User Login Procedure

TSC 900 TRANSFER SWITCH CONTROLLER
PM 151 REV 5 16/04/19 Thomson Power Systems
58
5.2. USER LOGIN PROCEDURE
With the transfer switch energized, follow the procedure below to Login to the TSC 900
controller:
• Navigate to the “Home” Page below and select the Locked Icon as shown below
• The Login entry screen automatically pops-up as shown below. Select User Name drop
down box and choose desired group, then type in password, then select “Apply” button.
Note: Initial Factory Default Password is “pass”
• A Login confirmation screen will pop-up if attempt was successful. Select Return to go
back to the Home Page.