4-15
4 PROGRAM MODE
Erase a Block of Points or Erase One Point
A block of point numbers can be erased within a job. To erase a block of points, the record numbers
representing the points are entered. After typing in the block of record numbers, press the (ENT) key.
The software will prompt the user to answer the question (YES) or (NO) to erase the record number. If
(YES) is selected, the block of record numbers (points) will be erased. If (NO) is selected, the message
(Cancel) will appear on the display for a few seconds and the Job Manager menu will appear.
Another option in Job Manager is to erase one point This routine works the same as erasing a block of
points, but only one record is erased at a time.
Follow the examples below to erase a block of points and to erase one point.
Erase a Block of points
Erase One Point
Operating procedure Operation Display
1
At the Job Manager menu press [F2] Erase
One Points.
2
The next screen allows the user to type in the
record number. Press (ENT) after typing the
record number. If a wrong number is typed in,
press [F6] to back space.To Exit, Press [F1].
3
The next screen allows the user to continue
erasing the record or to cancel the routine
without erasing the record. Press [F5] to
erase the record or [F6] not to erase the
record. Pressing [F6] will cancel the routine
and return back to the Job Manager menu.
[F2]
[ENT]
[F6]
OR
[F1]
[F5]
OR
[F6]
Operating procedure Operation Display
1
At the Job Manager menu press [F3] Erase
One Points.
2
The next screen allows the input the of record
numbers to erase. Press (ENT) after typing
each record number. If a wrong number is
typed in, press [F6] to back space.To exit this
routine, Press [F1].
3
The next screen allows the user to continue
erasing the block of records or to cancel the
routine without erasing. Press [F5] to erase
the record or [F6] not to erase the record.
Pressing [F6] will cancel the routine and
return back to the Job Manager menu.
[F3]
[ENT]
[F6]
OR
[F1]
[F5]
OR
[F6]
Job Manager (Pg 1/2)
F1 View Memory
F2 Erase a Block of Point
F3 Erase One Point
F4 Create Another Job
↓
Erase a Block of Point
REC # ❏-❏
EXIT BS
Erase a Block of Point
REC # [001-009]
Erase OK?
YES NO
Job Manager (Pg 1/2)
F1 View Memory
F2 Erase a Block of Point
F3 Erase One Point
F4 Create Another Job
↓
Erase One Point
REC # ❏
EXIT BS
Erase One Point
REC # [001]
Erase OK?
YES NO
To Next Page
Loading...
