Topcon MACHINE CONTROL AG System Five - Page 38

Control Box Usage
Topcon AG System Five Operator’s Manual
2-16
Follow these steps to view and/or change menu settings. See the
sections that follow for a description of each menu.
Averaging 1 – 100 1
Elevation Deadband 1 – 30 mm
(3 mm = .01 ft)
6 mm (.02 ft)
Slope Deadband .025% – .75% 0.075%
Beeper on/off off
Unit ft, cm ft.
Test open, short, pass no setting
Set Points 1 – 3 1
Record on/off on
Timed-Outputs 0.0 – 10.0 0.0
Table 2-2. Performance Menu Settings (Continued)
Menu LED Symbol Range Factory Setting
+
-