Topcon TRC-NW8F - Page 36

34
PREPARATIONS
Setting of auto illumination level adjustment function (Only in TRC-NW8F plus)
Set the auto illumination level adjustment function ON/OFF. (Factory default is "ON".)
The auto illumination level adjustment function works as follows: when observing the patient's
eye, the instrument adjusts the illumination level automatically according to the eye status and
displays the image with the optimum brightness.
1 On the "MENU" screen, make sure that "AUTO" is selected and press the .
2 Press the or to select "ILLUMI-
NATION" and then press the .
3 Select "ON" or "OFF" with the or
and then press the . The selected data is set.
ENTER SWITCH
DOWNWARD CURSOR SWITCH
UPWARD CURSOR SWITCH
ENTER SWITCH
MENU
ON
FIXATION
FLASH
SMALL PUPIL
ILLUMINATION
OFF
FOCUS
SHOOT
MEMORY
*The above figure shows the screen of TRC-NW8F plus.
DOWNWARD CURSOR SWITCH
UPWARD CURSOR SWITCH
ENTER SWITCH
MENU
ON
FIXATION
FLASH
SMALL PUPIL
OFF
FOCUS
SHOOT
MEMORY
ILLUMINATION
*The above figure shows the screen of TRC-NW8F plus.