Toro Multi Pro 1200 - Page 217

Multi Pro 1200/1250 Page 7 -- 55 Drive Train
20.Install fork shaft c ase:
A. Thoroughly clean mating surface of transaxle
case and fork shaft case.
B. Insert spindle lock (item 1) between fork shafts.
1
Figure 97
C. Insert two (2) steel balls (item 2) and two (2)
springs (item 1) into the grooves of the center plate.
2
1
2
1
Figure 98
D. Apply silicone sealant to mating surface of fork
shaftcase. Installfork shaftcase(item 3).Installcap
screws (items 2 and 1) noting location of longer
screw (item 1). Tightencap screws to a torque of 18
to 22 ft--lb (24.5 to 29.5 N--m). Check operation of
shifters and detent.
Figure 99
18 to 22 ft--lb
(24.5 to 29.5 N--m)
2
1
3
2
Drive Train