Toshiba e-STUDIO Series - Operation Section; Control Panel

2
© 2021 Toshiba Tec Corporation All rights reserved MFP ENTRY GUIDE
MFP BASIC TECHNOLOGIES
2 - 21
2.6 Operation Section
2.6.1 Control panel
The control panel consists of the button switches and touch panel to select various modes and the
LEDs to indicate the state of the MFP.
[ 1 ] Buttons (keys)
An MFP is operated by using the buttons on the control panel and the keys displayed on the touch
panel screen.
Fig. 2-34
Depending on the models, a screen in which no keys are displayed is embedded instead of the touch
panel.
Fig. 2-35
Touch panel Button