MFP ENTRY GUIDE © 2021 Toshiba Tec Corporation All rights reserved
MFP BASIC TECHNOLOGIES
2 - 12
2.3.7 Transferring
[ 1 ] Transfer system
There are various transfer systems for MFPs. The direct transfer system (Fig. A) and indirect transfer
system (Fig. B) have been adopted for MFPs of Toshiba Tec Corporation.
Fig. 2-19
[1] Photoconductive drum
[2] Developer unit (Y: Yellow, M: Magenta, C: Cyan, K: Black)
[3] Transfer roller
[4] Paper
[5] 1st transfer roller
[6] 2nd transfer roller
[7] Transfer belt
[ 1-1 ] Direct transfer system
This system has mainly been adopted for black-and-white models. Images on the photoconductive
drum are directly transferred onto the paper by the transfer roller.
[ 1-2 ] Indirect transfer system
This system has mainly been adopted for color models. Images on the photoconductive drum are
transferred onto the transfer belt by overlaying images with 4 colors (1st transfer) and then those
formed images are transferred onto the paper (2nd transfer).
KY
K
M C
BA
[1]
[1]
[7]
[6]
[3]
[2]
[5]
[2]
[4]
[4]
To Next Page
Loading...
