e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A © 2015 TOSHIBA TEC CORPORATION All rights reserved
PREVENTIVE MAINTENANCE (PM)
7 - 6
[ 2 ] Operational screen
1. Main screen
Fig. 7-3
Displaying of the number of print / develop pages (Page/D. cnt), drive counts (Cnt.) and
previous replacement date (Chg.) for a chosen unit
When the replacement date for the sub unit is different, press the [SUB UNIT] button to
move to the sub screen and see each information, otherwise information is not displayed
Moving to the next/previous page
Displaying of the standard number of drive counts to replace the unit parts
Displaying of the present drive counts
“*” is displayed next to the present number when the number of drive counts has exceeded
its PM standard number.
Displaying of the present number of print / develop pages
When there are differences among the sub units (parts), “_” is displayed and “CHECK
SUBUNIT” is displayed at the top
“*” is displayed next to the present number when the number of print / develop pages has
exceeded its PM standard number.
Displaying of the standard number of print / develop pages to replace the unit parts
Moving to the sub screen of the selected unit
Moving to the clear screen to clear the selected unit counters and , including all sub
unit (parts) counters belonging to that unit When the unit is not selected, all counters are
cleared.
Displaying of the main unit name
1
3
4
5
6
6
9
To Next Page
Loading...
