8
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
ERROR CODE AND TROUBLESHOOTING
8 - 9
E410 Cover open jam Front cover open jam: The front cover has opened
during printing.
P. 8-92
E420 PFP side cover open jam: The PFP side cover has
opened during printing.
P. 8-93
E430 ADU open jam: The ADU has opened during
printing.
P. 8-94
E440 Feed cover open jam: The feed cover has opened
during printing.
P. 8-95
E450 LCF side cover open jam: The LCF side cover has
opened during printing.
P. 8-96
E480 Bridge unit open jam: The bridge unit has opened
during printing.
P. 8-97
E490 Job separator cover open jam: The job separator
cover has opened during printing.
P. 8-98
E491 Offset tray cover open jam: The offset tray cover
has opened during printing.
P. 8-99
E510 Paper transport jam
(ADU section)
Jam not reaching the ADU entrance sensor: The
paper does not reach the ADU entrance sensor
after it is switchbacked in the exit section.
P. 8-75
E520 Stop jam in the ADU: The paper does not reach the
ADU exit sensor after it has passed the ADU
entrance sensor.
P. 8-77
E550 Other jam Paper remaining jam on the transport path: The
paper is remaining on the transport path when
printing is finished (caused by a multiple paper
feeding).
P. 8-101
E551 Paper remaining jam on the transport path (when a
service call occurs)
P. 8-102
E552 Paper remaining jam on the transport path (when
the cover is closed)
P. 8-102
E570 Paper transport jam Jam not reaching the reverse sensor: The paper
which has passed the exit sensor does not reach
the reverse sensor.
P. 8-78
E580 Stop jam at the reverse sensor: The trailing edge of
the paper does not pass the reverse sensor after its
leading edge has reached this sensor.
P. 8-78
Error code Classification Contents Troubleshooting
To Next Page
Loading...
