EasyManua.ls Logo

Toshiba E-STUDIO3508A - Page 967

Toshiba E-STUDIO3508A
1016 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
© 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO2008A/2508A/3008A/3508A/4508A/5008A
FIRMWARE UPDATING
11 - 7
Notes:
The display of items on this screen varies depending on the types of data written on the USB device.
Each item is displayed only when each data file is written on the USB device in the following
conditions.
If the USB device is not recognized properly, “USB device Not detected” message is displayed. In
this case, disconnect the USB device and connect again within 3 minutes, or shut down the
equipment and connect the device properly. Then repeat the procedure from (4).
If any of the error messages below is displayed, confirm if the data file in the USB device is correct.
Then repeat the procedure from (4).
Item Condition
1. SYSTEM FIRMWARE (OS Data) T410SF0Wxxxx.tar is written.
(xxxx is version.)
2. SYSTEM SOFTWARE (HD Data) T410HD0Wxxxx.tar is written.
(xxxx is version.)
3. ENGINE FIRMWARE TH410MWW.xxx is written. (xxx is version.)
4. SCANNER FIRMWARE TH410SLGWW.xxx is written. (xxx is version.)
5. RADF FIRMWARE H617DFWW.0xxx is written.
(When MR-3031 is connected)
H616DFWW.xxx is written.
(When MR-4000 is connected)
* xxx is version.
6. NIC FIRMWARE T410NIC0Wxxxx.tar is written.
* xxx is version.
7. FAX FIRMWARE FAXH625TZxx is written.
(When GD-1370 is connected.)
8. FINISHER FIRMWARE FIN1042T.xxx is written. (When MJ-1042 is connected.)
FIN1109T.xxx is written. (When MJ-1109 is connected.)
FIN1110T.xxx is written. (When MJ-1110 is connected.)
xxx is version.
9. SADDLE FIRMWARE SDL1110T.xxx is written.
(When MJ-1110 is connected.)
* xxx is version.
10. PUNCH FIRMWARE PUN6105T.xxx is written.
(When MJ-6105 is connected.)
* xxx is version.
Error
number
Error message Cause
01
Error Loadmodule Module loading failed.
02
Machine Model Get Error Model information was not
downloaded.
03
Copy Data with valid signature in USB
Storage
Checking of data file failed.
04
Other models ROMDATA TXXXXXXXX
* The version name comes at
“xxxx.xxx.x”.
Master data of other model are
stored.
05
Copy Signature File in USB Storage
Data files are not stored in the USB
device.
06
Patch and Normal package in one folder
of USB Storage
When both the system and patch
update packages are in the USB
device

Table of Contents

Other manuals for Toshiba E-STUDIO3508A

Related product manuals