e-STUDIO477S/527S/477SL © 2013-2016 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE AND TROUBLESHOOTING
5 - 26
5.2.9 Error history
In the setting mode (08-9703), the latest twenty groups of error data will be displayed.
Display example
EA10 99999999 2013 04 14 17 57 32 064 064 2362_1000_0000_0
_XXXXXXXXXX
Error code Total counter YYYY MM DD HH MM SS MMM NNN ABCD_EFHI_JLOP_Q_R
4 digits 8 digits 14 digits 3 digits 3 digits 23 digits
A Paper source
0: Not selected 1: Bypass feed 2: LCF 3: 1st drawer 4: 2nd drawer 5: PFP upper drawer
6: PFP lower drawer 7: Unused 8: Unused
B Paper size code (Only the codes of the supported papers will be displayed.)
0: A5/ST 1: A5-R 2: ST-R 3: LT 4: A4 5: B5-R 6: LT-R 7: A4-R 8: OTHER/UNIV
9: B5 A: FOLIO/COMP B: LG C: B4 D: LD E: A3 F: 13"LG G: 13.5"LG H: A6-
R I: J Post card, J Double post card J: 8.5"SQ K: A3-wide L: LD wide M: 8K N:
16K-R O: 16K P: Envelope (Com10, Com9) Q: Envelope(DL) R: Envelope(Monarch)
S: Envelope(Cho-3, Cho-4) T: Envelope(You-4,C5-R) U: Exective-R V: IndexCard-R
Z: Not selected
C Sort mode/staple mode
0: Non-sort/Non-staple 1: Group 2: Sort 7: Front staple
8: Double staple 9: Rear staple A: Saddle stitch
D ADF mode
0: Unused 1: AUTO FEED (SADF) 2: STACK FEED
E APS/AMS mode
0: Not selected 1: APS 2: AMS
FDuplex mode
0: Not selected 1: Book 2: Double-sided/Single-sided 4: Double-sided/Duplex copying
8: Single-sided/Duplex copying
G Unused
H Image shift
0: Unused 1: Book 2: Left 3: Right 4: Top 5: Bottom 6: Book+Top 7: Book+Bottom 8:
Left+Top
9: Left+Bottom A: Right+Top B: Right+Bottom
I Editing
0: Unused 1: Masking 2: Trimming 3: Mirror image 4: Unused 5: NEG/POS
J Edge erase/Dual-page
0: Unused 1: Edge erase 2: Dual-page 3: Edge erase & Dual-page
K Unused
LFunction
0: Unused 1: Copying 2: FAX/Internet FAX transmission 3: FAX/Internet FAX/E-mail
reception printing
4: Unused 5: Printing/List print 6: Scan/E-mail transmission
MMM Primary scanning reproduction ratio (Display in hexadecimal)
(Mx256)+(Mx16)+M
NNN Secondary scanning reproduction ratio (Display in hexadecimal)
(Nx256)+(Nx16)+N
O Color mode
0: Auto color 1: Full color 2: Black 3: Unused 4: Twin color copy 5: Gray scale
6: Unused 7: Image smoothing
To Next Page
Loading...
