Maintenance Utility Operating Manual 42678819FU02 - 36/38
B Limitations of Maintenance Utility
Limitations of the host (PC) side
(1) User restriction
Log in as an administrator in Windows. The software cannot be run by a user without administrator’s
privileges.
(2) Limitations of Windows 2000
When using Windows 2000, confirm that it is installed with Service Pack 1 or later.
When the printer is connected via USB using a version older than Windows 2000 Service Pack 1, the
communication function may not operate properly.
Limitations of the Maintenance Utility function
(1) Limitations for activating Maintenance Utility
Before activating Maintenance Utility, be sure that the printer to be maintained using the utility is on-line;
improper communication with the printer can result. For using the utility with the printer not equipped with
image drum(s), or the cover of the printer opened, and placed off-line, send the printer into forced on-line
mode before activating the utility. See Appendixes F for the procedure for establishing forced on-line mode.
(2) Limitations of the PU board setting value download function
After the PU board setting value is uploaded, if the download operation is conducted without restarting the
printer, a communication error may occur.
To Next Page
Loading...
