1
© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO477S/527S/477SL
SPECIFICATIONS/SYSTEM LIST
1 - 1
1. SPECIFICATIONS/SYSTEM LIST
Notes: In this document, a model name is replaced with an alias as follows:
• In this document, “CU board” refers to “SYS board”.
• In this document, “PU board(P-I: Board-Maintenance)” refers to “LGC board”.
Commonly Used Terms
1.1 Specifications
1.1.1 General
Model name Alias
e-STUDIO477S/477SL H-290
e-STUDIO527S H-291
CU-PCB Controller Unit PCB (SYS board)
PU-PCB Printer Unit PCB: (LGC board / Board-Maintenance)
RFID Radio Frequency Identifier (used for installation detection of toner cartridge or
process unit)
TAG RFID tag (ID information tag of toner cartridge or process unit)
ID Image Drum
TC Toner Cartridge
FFC Flexible Flat Cable
Memory
(RAM)
Main memory 2 GB
Page Memory None
HDD 320 GB
Account Codes 10000 codes
Department Codes 1000 codes
Machine version NAD: North America, Brazil
ARD: Argentina
AUD: Australia
MJD: Europe
To Next Page
Loading...
