Toshiba e-STUDIO477SL - SYS Board Cover

e-STUDIO477S/527S/477SL © 2013-2016 TOSHIBA TEC CORPORATION All rights reserved
REPLACEMENT OF PC BOARDS/HDD
6 - 4
6.1.2 SYS Board cover
6.1.3 SYS board
(1) Take off the right side cover.
 P. 6-1 "6.1.1 Right side cover"
(2) Remove 15 screws, and take off the SYS
board cover.
Fig.6-11
(1) Take off the right side cover.
 P. 6-1 "6.1.1 Right side cover"
(2) Take off the SYS board cover.
 P. 6-4 "6.1.2 SYS Board cover"
(3) Take off the fax unit if it's installed.
 P. 6-7 "6.1.6 FAX unit"
(4) Unplug all the connectors and cable
connected to the SYS board, and then take
out the connectors and cable from the SYS
board case.
Fig.6-12