Maintenance Utility Operating Manual 42678819FU02 - 9/38
2.2.2 Printer connection
After terminating printer search, select a printer you want to connect and click the [OK] button.
(Printer connection is not allowed while searching is in process. Be sure to finish printer search (termination by clicking
the [End Discovery] button is acceptable) and then carry out an operation for printer connection.)
The window shown below appears during the printer connection operation. The Maintenance Utility acquires
the printer information necessary to display the main window.
If the selected device is operating Optimum Print Service, the following error message appears, and the
Maintenance Utility terminates.
To Next Page
Loading...
