Toshiba e-STUDIO477SL - 6 Replacement of Pc Boards;Hdd; Replacement of Pc Boards;Hdd; Removal and Installation of PC Boards;Hdd; Right Side Cover

6
© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO477S/527S/477SL
REPLACEMENT OF PC BOARDS/HDD
6 - 1
6. REPLACEMENT OF PC BOARDS/HDD
6.1 Removal and Installation of PC Boards/HDD
Refer to the Hardware Guide for the removal and installation procedures of the PC boards other than
the SYS board, HDD, and SRAM board <for SYS board>.
Notes:
When the PC board/HDD is replaced, refer to the respective Notes and Cautions of
“Replacement of PC boards and HDD” in  P. 6-9 "6.2 Precautions, Procedures and Settings
for Replacing PC Boards and HDD".
6.1.1 Right side cover
(1) Remove two screws.
Fig.6-3
(2) Remove the screw located at the bottom of
the right side cover.
Fig.6-4