e-STUDIO477S/527S/477SL © 2013-2016 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND REPLACEMENT
2 - 4
2.1.5 GR-1160 (Spacer)
(5) Remove 2 screws and take off 2 fixing
brackets.
Fig. 2-9
(6) Lift the equipment up and remove the caster.
Fig. 2-10
(1) Press the [Power] button on the control panel
to shut it down.
(2) Turn the main power switch of the equipment
off.
(3) Disconnect the power cable.
(4) Remove 2 screws and take off 2 fixing
brackets.
Fig. 2-11
To Next Page
Loading...
