Toshiba e-STUDIO477SL - Finish PU Board Setting

Maintenance Utility Operating Manual 42678819FU02 - 30/38
2.4.1.1.2.4. Finish PU board setting
At the end of PU board setting, the "PU board setting – PU board setting finish" screen is displayed.
(a) [Finish] button
Click the [Finish] button on the "PU Board setting – PU board setting finish" screen to initiate restart of
the printer and the screen changes to the "PU Board setting - PU board setting start" screen.
Restarting the printer
Restart the printer using the On/Off switch on the printer unit to enable the downloaded board setting value.
(a)