Toshiba e-STUDIO477SL - Setting; Adjustment; 4 Setting; Adjustment; Image Related Adjustment; Adjustment Order

4
© 2013-2016 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO477S/527S/477SL
SETTING / ADJUSTMENT
4 - 1
4. SETTING / ADJUSTMENT
4.1 Image Related Adjustment
4.1.1 Adjustment Order
This chapter mainly explains the procedures for image related adjustment. In the following diagram, the
solid lines with arrow lead to essential adjustments, while the dotted lines lead to adjustments to be
performed if necessary.
Fig. 4-1
Parts to be replaced
Drum unit Transfer blet unit
4.1.3 Image dimensional adjustment
Item
Code in 05 mode
in the copy/printer/fax function
Order
1
2
7000
7001 (*2)
Code in 05 mode
7165 (*1)
Adjust the image quality if necessay. Chapter 4.2, 4.3, 4.4, 4.5
END
Item to be adjusted
4.2.1 Automatic gamma adjustment
*1: Use [10] + [FAX] test pattern.
*2: Adjustment can be done only for enlarging image.
Image dimensional adjustment